[DiY] VR Haptic Gun

SolKutTeR · 8. Oktober 2022

Falls jemand ein DiY-Projekt verfolgen möchte, wie wäre es mit einer VR Haptic Gun welche entsprechendes Feedback vermittelt?
Das ganze kommt von Robert Enriquez (robegamesios) und veranschlagt gerade mal $70 Materialkosten.

ProVolver Alternative?

VR Haptic Gun
This repo contains the hardware list, arduino firmware, software and STL files I used to build a VR Haptic Gun.

Full tutorial video:

Half-Life Alyx gameplay:

Pistol Whip gameplay:

Klicke in dieses Feld, um es in vollständiger Größe anzuzeigen.

Hardware:
For items 1 and 2, I think any toy gun with electric blowback (ebb) will work including those airsoft guns with ebb. I bought a lot of four RK45 and one SR12 for $50 including shipping from facebook marketplace.

Recoil RK-45 Spitfire laser tag pistol https://www.amazon.com/Recoil-Laser-Combat-Spitfire-Blaster/dp/B071KV9YP1

(Optional)Recoil SR-12 laser tag gun (I used the electric blowback of this gun and fitted it inside the Recoil RK-45 body)

ESP32 WROOM dev board (2 pcs) $16: https://www.amazon.com/dp/B07QCP2451?psc=1&ref=ppx_yo2ov_dt_b_product_details

6V RC battery (2 pcs) $20: https://www.amazon.com/dp/B08VWHWZ35?psc=1&ref=ppx_yo2ov_dt_b_product_details

Battery charger $13: https://www.amazon.com/dp/B07V3L7F91?psc=1&ref=ppx_yo2ov_dt_b_product_details

Step up boost converter (10 pcs) $11: https://www.amazon.com/dp/B089JYBF25?psc=1&ref=ppx_yo2ov_dt_b_product_details

(Optional)Battery indicator (2 pcs) $7: https://www.amazon.com/dp/B07YKGHVSV?psc=1&ref=ppx_yo2ov_dt_b_product_details

Toggle switch (10 pcs) $10: https://www.amazon.com/dp/B07XC5KB8D?psc=1&ref=ppx_yo2ov_dt_b_product_details

Quest 2 pistol grip (2 pcs) $15: https://www.amazon.com/dp/B09MCT4LC1?psc=1&ref=ppx_yo2ov_dt_b_product_details

Hitec cable (10 pcs) $12: https://www.amazon.com/dp/B07QJSWNFM?psc=1&ref=ppx_yo2ov_dt_b_product_details

Neodymium Magnet (6 pcs) $16: https://www.amazon.com/dp/B08YYNFQ41?psc=1&ref=ppx_yo2ov_dt_b_product_details

MOSFET (20 pcs) $10: https://www.amazon.com/gp/product/B...0t-20&linkId=61d738477c1332b796febffe72b8747d

Diode (100 pcs) $5: https://www.amazon.com/gp/product/B...0t-20&linkId=fc65d651ea3e32ed36e7bae2abe47e61

Resistors (1 kit) $12: https://www.amazon.com/gp/product/B...0t-20&linkId=a8e83b518a10f9e815cd58dc759716cf

Total cost for 1 gun is roughly $70. The most expensive part is the gun and the batteries. A bunch of the components come in bundles so buying them cost more. Obviously if you already own some of the parts, it can get cheaper.
Klicke in dieses Feld, um es in vollständiger Größe anzuzeigen.

Building:
The esp32 cannot drive the motor directly, hence you need to add some components to do this.

Here is the link to assemble the circuitry to control the motor using the esp32 (including the parts used): https://diyi0t.com/control-dc-motor-without-ic-motor-driver/

And this is how I connected it:

Here is a good video on how to disassemble a Recoil RK-45 spitfire pistol: https://www.google.com/url?sa=t&rct=j&q=&esrc=s&source=web&cd=&cad=rja&uact=8&ved=2ahUKEwiE4Ouiidz5AhUKLzQIHRUZBM8QwqsBegQIBhAB&url=https://www.youtube.com/watch?v=S81l8VBC7dw&usg=AOvVaw36cihDIYPepnFAOpwIpYmh

You can connect a buck converter if you want to lower the voltage going to the esp32, i ended up not installing this since the 6V battery didn't affect the esp32 (only got a little warm). I think the 5V pin can handle upto 12V but some boards may not like this and will heat up.

You can use any pin for the signal to the MOSFET's gate, in my final build i used pin23 for the signal.

The ebb i used was from a Recoil SR-12 rifle which uses 9V (6-AA batteries), so i used a step up boost converter to raise the voltage to 9V.

I used the hitec cable to connect/disconnect the battery from the gun. So when i need to charge the battery, i can just disconnect it from the gun and connect it to the charger.

I used the lower half of the pistol grip and attached a magnet. Doing this makes it easy to remove the pistol grip from the gun to mount the quest 2 controller, and then reattach it to the gun. (I could not find a 3D file for a quest 2 gun grip, otherwise i would have 3d printed instead of buying)

I 3d printed a battery holder, a cover for the esp32 and clip to attach velcro to the gun grip. All these are optional though.

I used some velcro and a cushion strap from an old bag to make a strap.

I added a toggle switch to turn the gun On/Off.

Finally, i fitted all the parts to the Recoil RK-45 pistol (had to cut and grind to fit the parts) and added some paint.

The blue light in the esp32 indicates it's connected to wifi.
Klicke in dieses Feld, um es in vollständiger Größe anzuzeigen.

Firmware:

In order to communicate with your esp32 via COM port, you need to install the Silabs CP210x USB to UART chip driver:
a. Go to Silicon Labs' driver download page: https://www.silabs.com/developers/usb-to-uart-bridge-vcp-drivers
b. Go to the downloads section and download the "CP210x Windows Drivers" (third in the list).
c. Extract the .zip and run CP210xVCPInstaller_x64.exe.
d. In your window computer, go to Settings -> Devices Manager, under Ports section, you will see Silicon Labs CP210x USB to UART Bridge (COM). This is the port you should select in your IDE. Make sure your micro USB cable is capable of transmitting data and not just for charging.

Next you need to add the ESP32 package to your Arduino IDE:
a. Go to File > Preferences in your Arduino IDE
b. In the "Additional Board Manager URLs" field, enter this link: https://dl.espressif.com/dl/package_esp32_index.json and click the OK button
c. Go to Tools > Board > Boards Manager
d. Search "esp32" and install the "ESP32 by Espressif Systems" package.
e. Select your ESP32 board from Tools -> Board -> Boards Manager -> ESP32 Dev Module

Open ESP32-HLA-WIFI.ino file located in \Games\Half Life Alyx\Esp32\ESP32-HLA-WIFI and change the following if you want to:
const uint ServerPort = 23; //if you change this port, make sure to match this port number you specify in the companion app.
In the function EchoReceivedData() modify the delay time to fit the timing of your ebb. Mine works at 75 millisecond for 1 firing cycle.
digitalWrite(PIN_MOTOR, HIGH); //This will turn ON the ebb motor
delay(75); //Change this to match your timing for the ebb. e.g. 75ms will run the ebb for 1 firing cycle.
digitalWrite(PIN_MOTOR, LOW); //This will turn OFF the ebb motor

Go ahead and upload the files to your esp32 board. If you are getting an error, you might need to press the boot button in the esp32 while uploading.

Turn On the gun.
a. Open up your smartphone (iOS and Android) and go to Wifi Settings
b. Connect to HapticGun_Connect access point.
c. Select or enter your Wifi SSID. Then enter your wifi password.
d. Check your esp32, the blue led should light up if the connection was successful.
e. If you double click the Reset Button, this will reset the wifi settings, and you will be able to connect to the HapticGun_Connect access point again.

Klicke in dieses Feld, um es in vollständiger Größe anzuzeigen.

Software: For Half-Life Alyx
I forked a BHaptics Half-Life Alyx repo and updated it to work with the gun's ebb. Credits goes to them for creating the original implementation.

Repository of BHaptics Half-Life Alyx: https://github.com/bhaptics/bhaptics-half-life-alyx

In the Publish Folder https://github.com/robegamesios/VRHapticGun/tree/main/Games/Half Life Alyx/Code/Publish, download and unzip Tactsuit+Gun_Alyx.zip.

Turn on the gun and go ahead and run TactsuitAlyx.exe.

Once bHaptics Tactsuit + Haptic Gun Alyx Interface is open:
a. Click the Browse... button and select your HLA folder (e.g. C:\Program Files (x86)\Steam\steamapps\common\Half-Life Alyx).
b. Enter your gun's IP Address and Port Number (default to Port 23. This should match the port number you used in the esp32 firmware).
c. click Start button.
d. under the hood, the program will copy vscripts\tactsuit.lua to your game directory's vscripts folder (e.g. C:\Program Files (x86)\Steam\steamapps\common\Half-Life Alyx\game\hlvr\scripts\vscripts\tactsuit.lua)
e. click Test button - if your gun is properly connected, it should activate (trigger fire).

Launch SteamVR and start Half-Life Alyx game.

NOTE: This app will work with the Haptic Gun even if you do not have BHaptics gear (tactsuit, tactosy, etc). Likewise, it should work with BHaptics gear without having a Haptic Gun.
Klicke in dieses Feld, um es in vollständiger Größe anzuzeigen.

TODOs
Detect when you disconnect/reconnect the gun grip from the gun. Then in the game, the weapon will automatically get removed (show only the hand) or automatically switch to the last weapon selected when reconnected.
Klicke in dieses Feld, um es in vollständiger Größe anzuzeigen.

Repository of BHaptics Half-Life Alyx:
https://github.com/bhaptics/bhaptics-half-life-alyx
Klicke in dieses Feld, um es in vollständiger Größe anzuzeigen.

Sci666 · 23. Januar 2025

wow, cool. aber klappt das hier NUR mit HL Alyx über dieses tool ?

[DiY] VR Haptic Gun

SolKutTeR

ADMIN
VRF Team

Sci666

Mitglied

Nützliche Suchen

[DiY] VR Haptic Gun

SolKutTeR ADMIN VRF Team

Sci666 Mitglied

Nützliche Suchen

SolKutTeR

ADMIN
VRF Team

Sci666

Mitglied